3
Thank you for choosing a Hama product.
Take your time and read the following instructions and
information completely. Please keep these instructions in a
safe place for future reference. If you sell the device, please
pass these operating instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Risk of electric shock
This symbol indicates product parts energized with a
dangerous voltage of sufficient magnitude to constitute
a risk of electric shock.
Warning
This symbol is used to indicate safety instructions or to
draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or
important notes.
2. Package Contents
•
“DR350” Digital Radio
•
Power Supply Unit
•
Clamp Connection
•
Screw Connection
•
White Antenna Guide
•
Black Antenna Guide
•
Quick Guide
3. Safety Notes
•
The product is intended for private, non-commercial use
only.
•
Protect the product from dirt, moisture and overheating
and use it in dry rooms only.
•
As with all electrical devices, this device should be kept
out of the reach of children.
• Children
are not permitted to play with the device.
Children
may not clean the product or perform
user
maintenance
without supervision.
•
Do not drop the product and do not expose it to any
major shocks.
•
Do not operate the product outside the power limits
given in the specifications.
•
Keep the packaging material out of the reach of children
due to the risk of suffocation.
•
Dispose of packaging material immediately according to
locally applicable regulations.
•
Do not modify the device in any way. Doing so voids the
warranty.
Risk of electric shock
•
Do not open the device or continue to operate it if it
becomes damaged.
•
Do not use the product if the AC adapter, adapter
cable or power cable is damaged.
•
Do not attempt to service or repair the device yourself.
Leave any service work to qualified experts.
4. Installation
Note – Installation location
Choose a suitable position for this purpose. The radio
must not be exposed to heat sources or moisture (not
above or near a stove/dishwasher/sink).
4.1 Installation with holding clip
(
Clamp Connection
)
•
Attach the holding clip to the top of the radio using the
four screws provided. You have the choice between three
mounting positions. (Fig. B)
•
Simply clip the radio with the mounted holding clip onto
the bottom of your wall cupboards. You can change the
mounting position of the radio this way at any time.
•
The installation position of the radio may be adjusted at
any time by changing the position of the holding clip.
•
Check whether the radio is securely attached.
