11
13.3 Factory reset
To reset the radio to the factory default settings, proceed
as follows:
•
Press [ ] and navigate to the menu item "System".
•
Select "Factory settings" and confirm by pressing [
OK
].
Confirm the following prompt with
Y
to reset the radio
to the factory default settings.
All settings made previously are deleted.
Note
•
Resetting to the factory default settings can remedy
some problems and malfunctions.
•
However, all settings made previously, such as presets
and station lists, are permanently deleted.
13.4 Info / software version
To have the radio display information about its software,
proceed as follows:
•
Press [ ] and navigate to the menu item "System".
•
Select "SW - Version" and confirm by pressing [
OK
].
13.5 Temperature sensor
•
The display at the bottom right-hand edge of the screen
tells you the current room temperature.
•
This is a display that does not have any adjustment
options.
14. Care and Maintenance
•
Only clean this product with a slightly damp, lint-free
cloth and do not use aggressive cleaning agents.
•
If you do not plan to use the product for a prolonged
period, turn off the device and disconnect it from the
power supply. Store it in a clean, dry place away from
direct sunlight.
15. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides
no warranty for damage resulting from improper installation/
mounting, improper use of the product or from failure to
observe the operating instructions and/or safety notes.
16. Service and Support
Please contact Hama Product Consulting if you have any
questions about this product.
Hotline: +49 9091 502-115 (German/English)
Further support information can be found here:
Содержание DR35
Страница 3: ...ANT A B 11 1 12 13 14 15 2 3 4 5 6 7 8 9 10...
Страница 4: ...C UPDATE PORT 16...