6
• Set your device such that it uses the camera on the front, so that you can take
a selfie, or use the camera on the back to take pictures or record videos normally.
• If using a terminal device with the iOS 6 operating system or a later version:
Press the
CAMERA 360 / iOS
release button (2) to trigger the selected function
(selfie, photo, video).
• If using a terminal device with the Android 4.2.2 operating system or a later version:
Press the
ANDROID
release button (3) to trigger the selected function (selfie,
photo, video).
Note – Remote release function
A direct line-of-sight connection between the terminal device and the Bluetooth
remote release is not necessary. You can, for instance, take a picture by pressing
the release button (2/3) in your coat pocket.
Note – Camera app
• The standard camera apps of certain terminal devices do not support the Selfie
Bluetooth remote release.
• You can install the
Camera 360
app on your terminal device to use in place of
the standard camera app.
• If you use this app, press the
CAMERA 360 / iOS
release button (2) to trigger
the selected function (selfie, photo, video).
• Press and hold the Power/Release button (2) for about 3 seconds
to switch off the Bluetooth selfie remote release.
6.4. Replacing the batteries
The battery has been designed to last for up to 2,000 shots, although this depends on
the conditions of use.
If the Bluetooth remote release does not respond after you press the release button (2/3),
or does not connect to the terminal device, etc., change the battery as follows: See (B).
7. Care and Maintenance
Only clean this product with a slightly damp, lint-free cloth and do not use aggressive
cleaning agents. Make sure that water does not get into the product.
