Hama AV-1200 AIR, Руководство пользователя

Страница: 28 / 51

Transmitter Introduction
Front, Side & Back Panel
1. 2.4GHz LED Shows ON/OFF status of the 2.4GHz RF transmission function.
2. IR Sensor Receiving IR signal from the remote controller.
3. Source LED Source indicator.
4. VCR Source Key Press this key to change between input sources on VCR.
5. TV1 Source Key Press this key to turn on the 2.4GHz RF transmission function
When the included power adaptor is connected, press this button
to switch between input sources on TV1.
When the 2.4GHz LED is lighting, hold this key for 3~5 seconds to
shut down the 2.4GHz RF transmission.
6. UHF Antenna
7. VCR Input/Output Port This allows the input/output of COMPOSITE signals.
It is recommended to connect VCR-type devices to this port.
8. SAT Input Port This allows simultaneous input of COMPOSITE and RGB signals.
It is recommended to connect IRD-type devices to this port.
9. 2.4GHz Integrated Antenna
10. Audio Stereo Output Port Stereo audio output. Same with TV1’s sound output.
11. IR Transmitter Port Connect the included IR transmitter to this port.
This allows the IR transmitter to control all devices that are
connected to the transmitter unit via IR sensor and
433 MHz frequency.
Note: Make sure the IR transmitter is facing the IR sensor
of all signal sources.
12. TV1 Input/Output Port This allows simultaneous COMPOSITE or RGB signal output
and COMPOSITE signal input.
13. AV Input Port This allows COMPOSITE signal input.
14. DVD Input Port This allows simultaneous input from COMPOSITE or RGB signals.
It is recommended to connect DVD-type devices to this port.
15. Power Input Port Connect the included power adaptor to this port.
– 28 –
00042585bda 23.12.2005 8:47 Uhr Seite 29