Hama Action, Руководство по эксплуатации

Страница: 3 / 71

2
G Operating instruction
Controls and Displays
A Base station
1. Display
2. Outdoor temperature
3. Outdoor humidity
4. Time
5. Day
6. Month
7. Room humidity
8. Indoor temperature
9. Weather forecast symbol
10. ‘CH | ’ button = switches channel | increases the current
set value
11. ‘C/F | SET’ button = switches between °C and °F | sets
time and date
12. ‘MEM | ’ button = displays the stored maximum/
minimum indoor and outdoor temperature values |
decreases the current set value
13. Measuring station wireless symbol
14. Battery compartment
15. Recess for wall mounting
16. Base
B Measuring station
17. Recess for wall mounting
18. Battery compartment
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw
your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or
important notes.
2. Package Contents
• ‘Action’ weather station (base station for indoors / measuring
station for outdoors)
• 5 AAA Micro batteries
• These operating instructions
3. Safety Notes
• The product is intended for private, non-commercial use only.
• Use the product for its intended purpose only.
• Protect the product from dirt, moisture and overheating, and
only use it in a dry environment.
• Do not use the product in the immediate vicinity of heaters
or other heat sources or in direct sunlight.
• Keep this product, as all electrical products, out of the reach
of children!
• Do not operate the product outside the power limits given in
the specifications.
• Do not use the product in areas where the use of electronic
devices is not permitted.
• Do not use the product in moist environments and avoid
splashes.
• Do not place the product near interference fields, metal
frames, computers, TVs, etc. Electronic devices and window
frames can negatively affect the product’s functionality.
• Do not drop the product and do not expose it to any major
shocks.
• Do not modify the product in any way. Doing so voids the
warranty.
• Keep the packaging material out of the reach of children due
to the risk of suffocation.
• Dispose of packaging material immediately according to
locally applicable regulations.
Warning – Batteries
• When inserting batteries, note the correct polarity (+ and
- markings) and insert the batteries accordingly. Failure to
do so could result in the batteries leaking or exploding.
• Only use batteries (or rechargeable batteries) that match
the specified type.
• Before you insert the batteries, clean the battery contacts
and the polar contacts.
• Do not allow children to change batteries without
supervision.
• Do not mix old and new batteries or batteries of a
different type or make.
• Remove the batteries from products that are not being
used for an extended period (unless these are being kept
ready for an emergency).
• Do not short-circuit batteries.
• Do not charge batteries.
• Do not throw batteries in a fire.
• Keep batteries out of the reach of children.
• Never open, damage or swallow batteries or allow
them to enter the environment. They can contain toxic,
environmentally harmful heavy metals.
• Immediately remove and dispose of dead batteries from
the product.
• Avoid storing, charging or using batteries in extreme
temperatures.
4. Getting Started
Note
Before use, ensure you insert the batteries in the measuring
station first and then in the base station.
4.1 Insert batteries
Measuring station
• Open the battery compartment (19) and remove the contact
breaker.
• Then close the battery compartment cover.