8
G
Operating instruction
Thank you for choosing a Hama product.
Take your time and read the following instructions and
information completely. Please keep these instructions in a
safe place for future reference. If you sell the device, please
pass these operating instructions on to the new owner.
The HDMI Switch “2x1” allows you to use two digital HDMI-
compatible video sources with one digital playback device
that supports HDMI. The switch is specifically designed for use
in home theatres to operate, for example, a DVD player and a
satellite receiver at the same time on a playback device with
high-resolution picture quality.
1. Package Contents
• HDMI switch “2x1”
• Operating instructions
2. Safety Notes
• The product is intended for private, non-commercial use
only.
• Protect the product from dirt, moisture and overheating
and use it in dry rooms only.
• Do not use the product in the immediate vicinity of heaters
or other heat sources or in direct sunlight.
• As with all electrical devices, this device should be kept out
of the reach of children.
• Lay all cables so that they do not pose a tripping hazard.
• Do not bend or crush the cable.
• Do not attempt to service or repair the device yourself.
Leave any service work to qualified experts.
• Do not open the device or continue to operate it if it
becomes damaged.
• Use the product for its intended purpose only.
• Use the item only in moderate climatic conditions.
• Do not use the product in moist environments and avoid
splashes.
• Do not drop the product and do not expose it to any
major shocks.
• Dispose of packaging material immediately according to
locally applicable regulations.
• Always pull directly on the plug when disconnecting the
cable, never on the cable itself.
• Do not use the product in areas where the use of electronic
devices is not permitted.
• Do not modify the product in any way. Doing so voids the
warranty.
3. Functions
• Simple switching of two HDMI sources (manually with
switch located on the device)
• Input: 2 HDMI sockets
• Output: 1 HDMI plug
• Plug and play installation (no software necessary)
4. Technical Specifications
Model designation
HDMI Switch “2x1”
Connections
2 HDMI inputs 1 HDMI output
Supported
resolutions
VGA / SVGA / XGA / UXGA
480i, 480p, 720i, 720p, 1080i,
1080p
HDCP function
HDCP-compatible (recommended
for AV equipment/HDTV)
Source selection
Manually with switch located on
the device
Weight (net)
90 g
5. Installation
1. Connect your AV devices (DVD player, satellite receiver,
etc.) to the HDMI
switch’s inputs.
2. Connect your display device (monitor, LCD, etc.) to the
HDMI switch’s output.
3. Switch between the individual AV devices using the toggle
on the HDMI switch.
6. Troubleshooting
Problem
Solution
No signal is output
on the display
device or the picture
quality is very poor:
Ensure that your output device is
HDCP-compatible.
Your HDMI cable should not
exceed a total length of 5 m.
Ensure that all cables are
correctly connected.
Switch all devices off and then
on again.
