Hama 5x PCI Card USB 2.0, Инструкция по эксплуатации

Страница: 9 / 14

d
Bedienungsanleitung
8
Note : We highly recommend that Window XP
x64 users at least install Service Pack 2 due
to improved functionality and enhancements.
Installation on Windows 2000 with Service
Pack 4
Preparation:
Ensure that your user account has admini-
strator rights for Windows 2000, otherwise
the driver installation will not be successful.
Because Windows 2000 with Service Pack 4
already includes the necessary drivers, you
do not need to install any drivers separately.
After you have inserted the card into your
computer and restarted Windows 2000, the
computer recognizes and installs the card
after a short time.
You can check whether the controller has
been installed successfully under
Start ->
Settings -> Control Panel -> System -> Hard-
ware -> Device Manager.
The following must
appear without a yellow exclamation mark.
Universal Serial Bus controllers
• NEC PCI to USB open host controller
• Standard Enhanced PCI to USB Host
Controller
• USB 2.0 root hub
• USB
root hub
• USB root hub
Note: We highly recommend that Window
2000 users at least install Service Pack 4 due
to improved functionality and enhancements.
Installation on Windows ME
After Windows ME has completed startup,
the
Hardware Wizard is displayed and the
card is recognised as a „PCI universal serial
bus“ . Select „Specify the location of the
driver (advanced)“ and insert the supplied
driver CD. Click -> Next .
Select „Specify a location“ and enter „D:\
NEC\uPD720101“ . („D:“ indicates the initial of
your CD drive and must be changed if neces-
sary).
-> Next . The card is now recognised as
a „NEC USB open host controller“ -> Next .
Windows ME then copies the necessary fi les
to your drive. After the drivers have been
installed, click
-> Finish . Now remove the
driver CD-ROM from your drive and keep it
in a safe place in case it is needed at a later
date. You must restart your computer before
you can use the card.
You can check whether the controller has
been installed successfully under
Start
-> Settings -> Control Panel -> System ->
Hardware -> Device Manager.
(You may need
to click „Display all control panel options“ to
view the „System“ icon). The following must
appear without a yellow exclamation mark.
Universal serial bus controllers
• NEC PCI to USB enhanced host controller
• USB 2.0 root hub device
Universal serial bus controller
• NEC USB open host controller (E13+)
• NEC USB open host controller (E13+)
• USB
master hub
• USB master hub
• USB master hub
Installation on Windows 98 Second Edition
After Windows 98SE has completed startup,
the
New Hardware Wizard is displayed and
the card is recognised as a „PCI universal
serial bus“ . Select „Specify the location
of the driver (advanced)“ and insert the
supplied driver CD in your drive. Click -> Next .
Select „Specify a location“ and enter „D:\
NEC\uPD720101“ . (you may have to change
„D:“ to the initial of your CD drive) -> Next .
The card is now recognised as a „NEC USB
open host controller“ -> Next. Windows 98SE
then copies the necessary fi les to your drive.
00049256bda.indd Abs1:8 00049256bda.indd Abs1:8 27.07.2007 11:36:39 Uhr 27.07.2007 11:36:39 Uhr