Hama 1T014160, Быстрое руководство

Страница: 5 / 39

Note – Battery life
After a full charge, the battery life will vary according
to use:
• Without use of the heart rate measurement function »
approximately two weeks
• Use of the heart rate measurement function for
approximately one hour per day » approximately
one week
• Continual recording and use of the heart rate
measurement function » approximately eight hours
4.2 Switching on
Switch on your activity tracker by pressing and holding the
operating button [1] for 5 seconds. The default time 12:00 AM
is shown on the display.
5. Setting up the activity tracker
5.1 Downloading the HR Fitness Tracker app
Note
The following operating systems are supported:
• iOS 7.0 or higher
• Android 4.3 or higher
• Open the iTunes App Store or Google Play Store on your
smartphone.
• Use the search function to find the HR Fitness Tracker app.
• Download the app in the usual way and install it on your
smartphone. To do this, follow the instructions on your
smartphone.
5.2 Pairing the activity tracker with your smartphone
Note
In order for your activity tracker to display calls, SMS and
WhatsApp messages, you need to enable the push mode
for messages in your smartphone’s settings.
Android mobile devices
• Make sure that the Bluetooth
®
function of your
smartphone and your activity tracker are switched on.
• Start the app on your smartphone and enter your personal
details. Tap [Apply].
• Using the menu at the upper-right edge of the screen, tap
[Connect to Wristband].
• Now select your activity tracker, namely ‘338852 HR
Fitness Tracker’. To start the connection to the app, tap
[Connect Device].
• If your activity tracker does not appear in the list, update
the list by tapping [Update].
• If the connection was successful, the activity tracker will
vibrate twice, display the current time as well as a tick
symbol.
• The activity tracker is now connected to the app and
transmits the data to your smartphone.
• Finally, specify your personal settings in the app by opening
the activity tracker using the menu.