3
G
Operating Instructions
Thank you for choosing a Hama product.
Take your time and read the following instructions and
information completely. Please keep these instructions in a
safe place for future reference. If you sell the device, please
pass these operating instructions on to the new owner.
1. Explanation of warning symbols and notes
Risk of electric shock
This symbol indicates a risk of electric shock from
touching product parts carrying hazardous voltage.
Warning
This symbol is used to indicate safety instructions or to
draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or
important notes.
2. Explanation of symbols used on the product label
Non-dimmable.
The lamp is not suitable for use with a conven-
tional dimmer.
Only use in a dry environment.
3. Safety instructions
•
This product is intended for private, non-commercial use
only.
•
Use the product only for the intended purpose.
•
Protect the product from dirt, moisture and overheating and
use it in dry rooms only.
•
Do not drop the product and do not expose it to any
major shocks.
•
Do not operate the product outside the power limits
specified in the technical data.
•
Do not use the product in the immediate vicinity of
heaters, other heat sources or in direct sunlight.
•
If the product is to be operated outdoors, it may be
operated only in protected outdoor areas.
•
Do not open the device or continue to operate it if it
becomes damaged.
•
Do not attempt to service or repair the product yourself.
Leave any and all service work to qualified experts.
•
Only use the article under moderate climatic conditions.
•
Do not use the product in a damp environment and
avoid splashing water.
•
Buy special or suitable installation material from a
specialist dealer for wall-mounting.
•
After the product has been installed, check that it is
sufficiently stable. You should repeat this check at regular
intervals.
•
Before mounting, check that the wall you have chosen
is suitable for the weight to be mounted. Also make
sure that there are no electric, water, gas or other lines
running through the wall at the mounting site.
•
Do not modify the product in any way. Doing so voids
the warranty.
•
Children must not play with the device. Cleaning and
user maintenance must not be carried out by children
without supervision.
•
As with all electrical products, this device should be kept
out of the reach of children.
•
Dispose of packaging material immediately in accord-
ance with the locally applicable regulations.
•
The product is intended only for use inside buildings.
•
The product must only be operated on a supply network
as described on the type plate.
•
Do not use the product in areas in which electronic
products are not permitted.
•
Use this product only with lights and fittings that are
approved for the application and appropriate for the
product. Please check that the product is in perfect
working order before making use of it.
•
Using damaged or inappropriate lights or fittings carries
the risk of electric shocks.
•
Whenever changing a light, always ensure that the light
or fitting in question is voltage-free. Switch it off and/or
pull the mains plug.
•
Not suitable for operation with dimmers, electrical
switches, photo cells, time switches or twilight switches.
•
As with all electrical products, this device should be kept
out of the reach of children.
•
Switch the lamp off via the light switch if it is not going
to be used for a prolonged period of time (e.g. holiday).
Please be aware that the presence simulation function
cannot then be activated.
Warning
•
Please note that lights (even LEDs) can generate heat
and may become hot. Always let the light cool off for a
few minutes before touching it or changing it.
•
The device may only be operated on a 230 V 50 Hz
AC voltage network. Work on the 230 V network must
only be carried out by an electrician certified in your
country. The applicable accident prevention regulations
must be adhered to.
•
To avoid an electric shock from the device, please
disconnect the mains voltage (switch off the automatic
circuit breaker). Failure to comply with the installation
instructions can cause fires or other hazards.
