4
5. Operation
5.1. Automatic time setting using the DCF signal
• Once you have removed the contact breaker, an acoustic signal sounds and the
alarm clock automatically starts searching for a DCF signal. During the search, the
radio icon (2) will flash.
• After 5-10 minutes (depending on how quickly the radio signal is received), the
clock sets itself to the correct time.
• When the wireless signal is received, the date, time, weekday and temperature are
automatically set and the radio icon (2) is displayed.
• If the clock is unable to receive a time signal wirelessly, the time/weekday/
temperature are displayed and the radio icon (2) is not visible. In this case, you
can set the time manually.
Display
Searching for the DCF signal
Display flashing
Active
Displayed continuously
Successful – signal is being received
Not displayed
Deactivated
5.2. Manual setting
Manually setting the date/time/calendar
• Press and hold the
Down (10)
button for approx. 3 seconds to stop the search for
the DCF signal. The radio icon (2) goes out and you can set the time manually.
• Press and hold the
SET
button
(9)
for approx. 3 seconds to start manually setting
the date/time.
• Set the following information in the order listed:
• To select the individual values, press the
UP (8)
button or the
Down (10)
button
and confirm each selection by pressing the
SET
button
(9)
.
Содержание 136203
Страница 2: ...AL2 DOWN SET UP AL1 11 9 10 8 7 1 2 3 6 5 4 12...
Страница 28: ...27 1 2 3 4 5 6 7 AL1 1 8 UP 9 SET 10 DOWN 11 AL2 2 12 Hama 1 R...
Страница 29: ...28 2 RC 650 2 3...
Страница 30: ...29 4 12 5 5 1 DCF DCF 2 5 10 2 2 DCF 5 2 3 Down 10 DCF...
