2
G
Operating instructions
Thank you for choosing a Hama product.
Take your time and read the following instructions
and information completely. Keep these operating
instructions in a safe place for future reference.
1. Explanation of Warning Symbols and Notes
Warning
• This symbol is used to indicate safety
instructions or to draw your attention to
specific hazards and risks.
Note
• This symbol is used to indicate additional
information or important notes.
2. Extent of Delivery
• USB 3.0 Card Reader
• These operating instructions
3. Safety Instructions
• The product is intended for private, non-
commercial use only.
• Protect the product from dirt, moisture and
overheating and use it in dry rooms only.
• Do not use the product in the immediate vicinity
of heaters or other heat sources or in direct
sunlight.
• Do not drop the product and do not expose it to
any major shocks.
• Do not attempt to service or repair the product
yourself. Leave any and all service work to
qualified experts.
• Do not open the device or continue to operate it
if it becomes damaged.
• Dispose of packaging material immediately
according to locally applicable regulations.
• Do not modify the product in any way. Doing so
voids the warranty.
• Keep this product, as all electrical products, out
of the reach of children!
4. System Requirements
The multi Card Reader supports the following
operating systems:
• Windows 10/8/7/Vista/XP
• Mac OS 9.x or higher
5. Product Features
The product supports the following memory cards:
• SD / SDHC / SDXC
• microSD / microSDHC / microSDXC / miniSD* /
miniSDHC*
• MMC / MMCplus / RS-MMC* / MMCmobile*/
MMCmicro*
*only with adapter (not included)
6. Getting started
Note – Compatibility USB 2.0 and USB 1.1
• The USB 3.0 multi Card Reader is backwards
compatible to USB 2.0 and USB 1.1.
• No additional drivers are needed. The
installation runs automatically.
• Connect the USB 3.0 Card Reader to an available
USB port on your computer.
• Plug your memory card into the appropriate slot
of the multi Card Reader. A flashing LED indicates
a successful connection. You can now run the
data transfer between your computer and the
memory card.
• The LED indicator light flashes during data
transfer.
• It is also possible to transfer data between two
memory cards which are plugged simultaneously
into the same Card Reader (hot swapping).
Note – USB 3.0
• For running the Card Reader with USB 3.0,
your computer must have a USB 3.0 interface
and an accurate installed USB 3.0 driver.
• The installation runs automatically too.
