Hama 114836, Руководство по эксплуатации

Страница: 2 / 36

2
G Operating instructions
Thank you for choosing a Hama product.
Take your time and read the following instructions and
information completely. Keep these operating instructions in
a safe place for future reference.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety ins
tr
uctions or to draw
your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or
important notes.
2. Extent of Delivery
• USB 3.0 Card Reader
• USB 3.0 cable
• These operating instructions
3. Safety Instructions
• The product is intended for private, non-commercial
use only.
• Protect the product from dirt, moisture and overheating
and use it in dry rooms only.
• Do not use the product in the immediate vicinity of
heaters or other heat sources or in direct sunlight.
• Do not drop the product and do not expose it to any
major shocks.
• Do not attempt to service or repair the product yourself.
Leave any and all service work to qualified experts.
• Do not open the device or continue to operate it if it
becomes damaged.
• Dispose of packaging material immediately according to
locally applicable regulations.
• Do not modify the product in any way. Doing so voids
the warranty.
• Keep this product, as all electrical products, out of the
reach of children!
4. System Requirements
The multi Card Reader supports the following
operating systems:
• Windows 10/8/7/Vista/XP
• Mac OS 9.x or higher
5. Product Features
The product supports the following memory cards:
• SD / SDHC / SDXC
• microSD / microSDHC / microSDXC / miniSD* / miniSDHC*
• MMC / MMCplus / RS-MMC* / MMCmobile*/ MMCmicro*
• MS / MS Pro / MS ProDuo / M2*
• CompactFlash Type I
*only with adapter (not included)
6. Getting started
Note – Compatibility USB 2.0 and USB 1.1
• The USB 3.0 multi Card Reader is backwards
compatible to USB 2.0 and USB 1.1.
• No additional drivers are needed. The installation
runs automatically.
• Connect the included USB 3.0 cable to the multi Card
Reader.
• Connect the free connector of the USB cable to a free USB
port at your computer.
• Plug your memory card into the appropriate slot of the
multi Card Reader. You can now run the data transfer
between your computer and the memory card.
• It is also possible to transfer data between two memory
cards which are plugged simultaneously into the same
Card Reader.
Note – USB 3.0
• For running the Card Reader with USB 3.0, your
computer must have a USB 3.0 interface and an
accurate installed USB 3.0 driver.
• The installation runs automatically too.