2
G
Operating instruction
Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely. Please
keep these instructions in a safe place for future reference. If you sell the device, please
pass these operating instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
W
arning
This symbol is used to indicate safety instructions or to draw your attention to specific
hazards and risks.
N
ote
This symbol is used to indicate additional information or important notes.
2. Package Contents
•
2 speaker stands
•
6 support plates
•
2 brackets
•
2 adhesive hook-and-loop strips for securing the speakers
•
Installation kit (see contents, Fig. 1)
•
These operating instructions
N
ote
Please check that the installation kit is complete before installing the
bracket and ensure that none of the parts are faulty or damaged.
3. Safety Notes
W
arning
•
Given the multitude of terminal devices, the supplied mounting kit is unable to
cover every option.
•
In a few cases, the screws for attaching the terminal device to the product are
too long.
•
Read the operating instructions for your terminal device before attempting to
mount it. The instructions provide information about the type and measurements
of suitable fastening materials.
•
If the supplied mounting kit does not contain suitable fastening materials for
mounting the terminal device, purchase these from a specialised dealer.
•
Never apply force during mounting. This can damage your terminal device or the
product.
•
If in doubt, have this product mounted by a qualified technician - do not attempt
to mount it yourself!
•
Once you have mounted the product and the attached load, check that they are
sufficiently secure and safe to use.
•
You should repeat this check at regular intervals
(at least every three months).
•
When doing so, ensure that the product does not exceed its maximum permitted
carrying capacity and that no load exceeding the maximum permitted dimensions
is attached.
•
Make sure that the product is loaded symmetrically.
•
Maintain the necessary safety clearance around the attached load (depending on
the model).
•
In the event of damage to the product, remove the attached load and stop using
the product.
4. Intended use and specifications
•
The product is for domestic use
•
The product is intended for indoor use only.
•
Only use the product for the intended purpose.
•
Maximum load bearing capacity: 5 kg
•
Overall height: 75.8 – 120 cm
5. Installation requirements and installation
N
ote
•
Only mount the product with the help of a second person. Get the support and
help you need.
•
Different end devices have different options for connecting cables and other
devices. Before installation, ensure that the necessary connections will still be
accessible after installation.
•
The same mounting kit is included with all of our TV wall brackets. Depending on
the product and mounting type, you may not need to use the entire mounting kit.
Unneeded screws and other small parts may be left over, even if the wall bracket
is properly mounted. Keep these leftover parts with the operating instructions in a
safe place, just in case you might need them later on.
•
Observe the other warnings and safety instructions.
•
Proceed step-for-step in accordance with the illustrated installation instructions
(Fig. A ff.).
6. Setting and maintenance
W
arning
Always adjust the product with the help of a second person. Get the support and
help you need.
•
To adjust the height, undo the connecting piece, set the required height and secure
the connecting piece again. (see figure 5)
•
Check that the bracket is secure and safe to use at regular intervals (at least every
three months). Only use water or standard household cleaners for cleaning.
7. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage
resulting from improper installation/mounting, improper use of the product or from
failure to observe the operating instructions and/or safety notes.
