Hama 00186448, Руководство по эксплуатации

Страница: 3 / 70

3
• Do not mix old and new batteries, or batteries of different types or from different manufacturers.
• Remove the batteries from products that are not being used for an extended period (unless these
are being kept ready for an emergency).
• Do not short-circuit batteries.
• Do not charge batteries.
• Do not burn batteries.
• Keep batteries out of the reach of children.
• Never open, damage or swallow batteries or allow them to enter the environment. They can
contain toxic, environmentally harmful heavy metals.
• Remove spent batteries from the product and dispose of them without delay.
• Avoid storing, charging and using in extreme temperatures and at extremely low atmospheric
pressures (such as at high altitudes).
4. Getting started
Open the battery compartment cover , remove the contact interrupter and close
the battery compartment cover again.
5. Operation
5.1. Automatic setting of the time according to the DCF signal
• After the contact interrupter is removed, the alarm clock automatically starts to search for a DCF
signal.
• After around 5-10 minutes (depending on how quickly the radio signal is received), the hands on
the clock will adjust to the correct time.
5.2. Manual time setting
• If the correct time has not been set automatically after around 10 minutes, no DCF signal has been
received.
• Press and hold the SET button to set the correct time manually. Once the required time is reached,
release the SET button.
• The clock automatically continues to search for the DCF signal every day. Once the signal is received
successfully, the manually set time and date are overridden.
• Change the location if necessary and avoid areas with sources of interference (cordless and mobile
phones, radio loudspeakers, WLAN, etc.).
5.3. Starting manual reception
• When the clock is running, press the REC button for 3 seconds. The hands move to the 12:00
position. The clock now starts to search for the DCF signal.
• If no signal has been received, the clock will show the time previously stored.