5
SETup
5. Setup
Press on the housing and slide it anti-clockwise to the mark (1). Remove the cover. Use a screwdriver to remove
the metal clip (2 and 3). Remove the battery and remove the isolation strip (4). Reinsert the battery. Screw the
metal clip back on. Replace the lid and turn it clockwise to the mark.
1.
2.
3.
4.
5.1 Activation
Press and hold the pairing button for 2 seconds (1) until you hear a tone (2). Pairing mode is now active for 10
minutes and ends with an acoustic signal. To pair the item finder again after these 10 minutes, press the button
again for 2 seconds.
1.
2.