24
OPERATInG yOUR SMART WATCH
7.5.15 Settings
By tapping the
[SETTInGS
]
symbol, you access a sub-menu where you can make the following
settings and turn off or reset your smart watch.
• By tapping the
[WAKE SCREEn
]
symbol, you can enable or disable arm movement to switch on
the display. When arm movement is activated, you can switch on the display by turning your wrist.
• By tapping the
[DO nOT DISTURb
]
symbol, you can enable or disable Do Not Disturb mode.
When Do Not Disturb mode is activated, no notifications are forwarded to your smart watch.
• By tapping
[WATCH FACE
]
, you can choose between four different home screens. Confirm your
selection by tapping on the respective home screen.
• By tapping
[SCREEn SETTInGS
]
, you can set the brightness, the screen-on time and the
automatic brightness control of the display.
You can adjust the brightness of the display in three steps
[
]
.
The screen-on time determines how long the display of your smart watch remains active after an
operation. You can set the screen-on time between 5 - 20 sec. Note that a longer screen-on time has a
negative effect on the battery life of your smart watch.
If you activate the automatic brightness control, your smart watch automatically adjusts the brightness
of the display according to the ambient brightness.
• By tapping
[TURn OFF
]
and confirming the subsequent question, you can turn off your smart
watch.
• By tapping
[RESTART
]
and confirming the subsequent question, you can restart your smart watch.
• By tapping
[RESET
]
and confirming the subsequent question, you can restore your smart watch to
the factory default settings. This deletes all recorded user data.
• By tapping
[AbOUT
]
, you will see the current firmware version, the MAC address and the model
name of your smart watch. The MAC address makes your smart watch uniquely identifiable when you
connect the device to your smartphone via Bluetooth.
