4
5.2 Setting and using the alarm function
• In normal time mode, press the
MODE
button (2) once to set the alarm
function. ALM is shown on the display.
• Press the
SET
button (3) for approximately 2 seconds. The hours display
begins to flash.
• Press the
UP
button (4) or the
DOWN
button (5) to select the hour for the
alarm time and confirm your selection by pressing the
SET
button (3). The
minutes display begins to flash.
• Repeat the process to set the minutes for the alarm time. Then confirm the
process with the MODE button.
• Press the
MODE
button (2) twice to go to the start display.
• To activate the alarm function, you must press the
MODE
button (2) once to
switch to ALM mode. If you press the
UP
button (4) once, the bell symbol
appears on the display and the alarm is set.
• If you press the
DOWN
button (5) during the alarm, the alarm will be
interrupted for 4 minutes and then go off again. The (
and
:
) symbol
flashes.
• If no button is pressed, the alarm automatically switches to the snooze
function; the alarm will be likewise interrupted for 4 minutes and then go off
again. The (
and
:
) symbol flashes.
• Press any button (except the
DOWN
button) to stop the alarm/snooze
function.
Note
• When the alarm function is activated, the alarm melody sounds daily at the
selected time.
• To completely deactivate the alarm function, press the
MODE
button (2) and
then press the
UP
button (4) three times until the symbol is no longer
shown on the display. Press the
MODE
button (2) twice to return to the start
display. is no longer shown on the display.
5.3 Maximum and minimum value (MAX/MIN)
• The base station automatically stores the maximum and minimum indoor
temperature and humidity values.
• Repeatedly press the
UP
button (4) to switch between the current
temperature, maximum temperature (MAX) and minimum temperature (MIN).
• Press and hold the
UP
button (4) for approximately 2 seconds to reset the
stored maximum and minimum values.
5.4 Hourly reminder alarm
• If you activate the hourly reminder alarm, a signal will sound every hour on
the hour.
• Press the
MODE
button (2) once to go to alarm mode (ALM).
• Press the
UP
button (4) twice to activate the hourly reminder alarm.
• If you press the
UP
button (4) a third time, both the alarm you have set (to go
off at a particular time) and the hourly reminder alarm will be activated. Press
the button a fourth time to deactivate both alarms.
•
appears on the display if the hourly reminder alarm is activated.
appears on the display if both the alarm you have set and the hourly
reminder alarm are activated.
