SETUP
10
Then generate a customised QR code and numerical code via the point (share via Matter).
Now follow the steps in your chosen Matter-enabled app to set up the item using the generated number
or QR code.
4.3.2 Initial connection via a third-party app
You can also use our items without first connecting them to the Hama Smart Home app. Please follow the
steps below:
•
Open the Matter-compatible app you have selected and start device connection.
•
Press and hold the button on the socket for approx. 5 seconds until the LED starts to flash.
•
Scan the QR code on the side of the socket with the corresponding app.
Note
•
Please ensure that the app you have selected supports the Matter standard.
•
Find out about further requirements set out by the provider and follow these as necessary.