6.2 Setting angle and tilt
The viewing angle and tilt of the holder can be continuously adjusted using a ball head.
•
Always set the angle and tilt without the terminal device inserted.
•
Loosen the clamping screw of the ball head.
•
Set the angle and tilt as desired and tighten the clamping screw.
6.3 Inserting/removing the Dashcam
Note
Continually check that the suction cup holder is securely seated and the Dashcam is securely held.
•
Slide the Dashcam into the holder (14) of the suction cup holder.
•
Pull the Dashcam out of the holder by carefully moving the Dashcam to and fro.
7. Operation
7.1. Connection to the vehicle’s electrical system
Warning – rechargeable battery
•
Only use suitable charging devices with USB connections for charging.
•
As a rule, do not use charging devices or USB connections that are defective and do not try to
repair them yourself.
•
Do not overcharge the product or allow the battery to completely discharge.
•
Avoid storing, charging or using batteries in extreme temperatures.
•
When stored over a long period of time, batteries should be charged regularly (at least every
three months).
•
Connect the included Mini-USB charging cable to the Mini-USB charging socket (11) on the
Dashcam and to the vehicle socket of the electrical system.
•
The Dashcam automatically switches on when the engine is started.
•
The status LED (12) is constantly lit red.
Note - Battery capacity
The battery has a limited life of about 2–3 minutes. This buffer function is used for continuation of
the time, for example. Longer operation is possible only with a connected vehicle adapter.
7
Содержание 00136697
Страница 2: ...3 1 2 4 5 6 7 8 9 10 A B...
Страница 3: ...11 12 13 15 14 C D...