13
Display
Trend
Increasing
Constant
Decreasing
6.5. Maximum and minimum temperature values
The base station automatically stores the maximum and minimum indoor/outdoor
temperature and humidity values.
•
In temperature mode, repeatedly press the
mem.
button (23) to switch between the
current temperature, minimum temperature (MIN) and maximum temperature (MAX).
•
Press and hold the
mem
. button (23) for approx. 3 seconds to reset the stored maximum
and minimum values.
6.6. Outdoor temperature alarm
•
Repeatedly press the
channel
button (22) to select the measuring station channel (4) for
which you would like to set an alarm.
•
In temperature mode, repeatedly press the
alarm
button (21) to display the outdoor
temperature alarms / .
•
Press and hold the
alarm
button (21) for approx. 3 seconds until the outdoor temperature
display (6) begins to flash.
•
Press the button (18) or the button (19) to set the displayed limit value and confirm
your selection by pressing the
alarm
button (21).
•
While the upper or lower limit values are displayed, press the button (18) or the
button (19) to select the temperature value or
OFF
and then press the
alarm
button to
confirm the selection (21).
Select the temperature value/
OFF
to activate/deactivate the outdoor temperature alarm.
•
The alarm is triggered accordingly if the outdoor temperature reaches one of these limit
values.
The symbol and the outdoor temperature start to flash and an alarm signal sounds.
Press the
alarm
button (21) to stop the alarm. Otherwise, it will stop automatically after
2 minutes.
