Hama 00113983 TH400, Руководство по эксплуатации

Страница: 3 / 22

4 5
Warning – Batteries
• Immediately remove and dispose of dead batteries from the product.
• Only use batteries (or rechargeable batteries) that match the specified type.
• Do not mix old and new batteries or batteries of a different type or make.
• When inserting batteries, note the correct polarity (+ and - markings) and insert
the batteries accordingly. Failure to do so could result in the batteries leaking
or exploding.
• Do not charge batteries.
• Keep batteries out of the reach of children.
• Do not short circuit the batteries/rechargeable batteries and keep them away
from uncoated metal objects.
4. Getting Started
• Remove the screen protector from the display.
4.1. Inserting the batteries
• Open the battery compartment (16) and remove the contact breaker. Close the
battery compartment cover.
4.2. Replacing the batteries
• Open the battery compartment (16), remove the dead batteries and insert two new
AAA batteries with the correct polarity. Close the battery compartment cover.
5. Operation
Note – Input
Hold down the
+
button (12) or the
–
button (13) to select the values faster.
5.1. Automatic setting using the DCF signal
• Once the batteries are inserted, the clock automatically searches for a DCF signal.
During the search, the wireless icon (4) flashes.
Display (4) Searching for the DCF signal
Display flashing
Active
Displayed continuously
Successful – signal is being received
Not displayed Deactivated
• If the station still does not receive a signal, press and hold the WAVE button (14) for
approx. 3 seconds to start the manual search for the DCF signal. The wireless icon
(4) will start to flash.
Note – Time settings
• The search process takes about 7 minutes. If the search fails, it ends and is
repeated at the next clock hour. The wireless icon (4) disappears.
• In the meantime you can, however, set the time and the date manually.
• The clock automatically continues to search for the DCF signal on a daily basis
(between 1:00 a.m. and 3:00 a.m.). If the signal is received successfully, the
manually-set time and date are overwritten.
• Press and hold the WAVE button (14) again for approx. 3 seconds to stop the
manual search.
Note – Summer time
• The clock automatically switches to summer time. DST (5) appears on the display
as long as summer time is activated.