14
d
Bedienungsanleitung
15
g
Operating Instruction
6. Operation & Maintenance
If the bracket is crooked after installation, the TV element can be adjusted
by +/- 5°. The adjusting screw is located under the plastic cap (labelled Levelmount).
Always adjust the bracket with the help of a second person. To adjust the tilt and movement
side to side, loosen the knurled screw slightly, set the desired tilt/pivoting range and retighten
the screw securely.
Check that the bracket is secure and safe to use at regular intervals (at least every three
months). Only clean with water or standard household cleaners.
--------------------------------------------------------------------------------------------------
TV-Relax
7. Note on Instructions
Keep the instructions for the complete service life of the product and pass them on to
subsequent users or owners
--------------------------------------------------------------------------------------------------
8. Package contents
See page 6-7
While you are unpacking, ensure that the set is complete and that there is no visible damage
(crimped cables, damaged insulation, etc.). Keep the packaging and inlay for transport at a
later time.
--------------------------------------------------------------------------------------------------
9. Positioning and installation
Secure the LED tubes using the mounting clips and the applied tape. The tubes have many
uses, and are particularly useful for atmospheric, indirect back ground lighting in conjunction
with fl at panel displays.
Connect the tubes via the plugs, using the extension cable if necessary. Insert the fi rst tube
into the socket of the control box. The opposite end does not need to be inserted anywhere.
Connect the control box to the power supply unit and then plug the power supply unit into a
power outlet. The control box has a magnetic back, with which you can, for example, hang
the box on a metal wall bracket.
Read through and follow the safety notes carefully before using the device for the fi rst time.
--------------------------------------------------------------------------------------------------
3. Parts List
See page 3.
While you are unpacking, ensure that the set is complete and that there is no visible damage
(crimped cables, damaged insulation, etc.). Keep the packaging and inlay for transport at a
later time.
--------------------------------------------------------------------------------------------------
4. Warning and Safety Instructions
For proper mounting, please have this bracket fi tted by a qualifi ed technician. Please check
that the assembly set for completeness before installing the bracket and ensure that none
of the parts are faulty or damaged. Use the bracket for the intended purpose only. Before
installing the bracket, ensure that the wall on which the television is to be mounted is
suitable for the weight and make sure that no electrical wires, water, gas or other lines are
located around the installation location. Please note in particular that the provided wall
anchors are suitable only for concrete and brick walls. If the wall on which the television is
to be mounted is made of other materials, you should buy appropriate installation material
from a specialised dealer. Also observe the necessary safety clearance around the TV set
(depends on the model).
The bracket may not be mounted above locations where persons might linger. Once you have
mounted the bracket and the fl at panel display, check that they are suffi ciently secure and
safe to use. You should repeat this check at regular intervals (at least every three months).
If the bracket is damaged, remove the TV and do not continue to use the bracket. Mount the
TV and the bracket only with the help of a second person. Adjust the bracket only with the
help of a second person. Ensure that electrical cables are not crushed or damaged during
installation and adjustment. Do not place loads on the bracket that are heavier than the
load bearing capacity specifi ed and do not exceed the specifi ed maximum size. Ensure that
the bracket is loaded symmetrically. During adjustment, ensure that the bracket is loaded
symmetrically and that the maximum weight is not exceeded.
Hama GmbH & Co. KG does not accept warranty claims for improperly installed brackets or
any resulting damage.
--------------------------------------------------------------------------------------------------
5. Installation
Observe the warning and safety instructions.
Follow the illustrated instructions on pages 4-5 for installation.
--------------------------------------------------------------------------------------------------
00096007bda.indd Abs1:14-Abs1:15
00096007bda.indd Abs1:14-Abs1:15
08.12.2009 13:28:17 Uhr
08.12.2009 13:28:17 Uhr
