HF2013DX-A HF AMPLIFER INSTRUCTION MANUAL
Page 20 of 37
To exit the Communication settings menu press the
AUTO
button. The PA will enter AUTO
mode only if all settings are correct and connection has beenestablished. You can check I
that thecorrect frequency and TRX type has been displayed on the LCD OSD.
ANTENNA SWITCHING MENU
If you have an3rd party external antenna switch connected to PA (i.e. Microham TEN
SWITCH, Ameritron RCS-12LX etc)you need to configure the assignment of each port to
specific band/antenna.By pressing
SET
and scrolling to ANTENNA SETTINGS you will then
control the Antenna Options. Press
SET
again and you will getthecurrent band and its antenna
selection. By scrolling
∧
∧
∧
∧
and
∨
∨
∨
∨
you can select a BAND whichyou want to assign to an
ANTENNA.
You then select how many antennas we want per current band (1 or 2) and then always
confirm your selection by pressing
SET
. Please note that we are only currently supporting
one antenna per band. Ie. Select 1. By scrolling
∧
∧
∧
∧
and
∨
∨
∨
∨
you assign which PORT is used
onyour external antennas switch. Ie. ANT 1 ON PORT 01
Содержание HF2013DX-A
