Halton Safe Management 2.0 Скачать руководство пользователя страница 50

Страница: 50 / 88

7 Maintenance

7.1 Before you start

7.1.1 Safety during maintenance

NOTICE

NOTICE
All installation, commissioning, and maintenance work must only be carried out by
qualified personnel.

7.1.2 Checks before maintenance

Make sure you have the following:

▪ A list of the ID numbers and locations of the Halton Safe Management 2.0 system components

▪ Access to the Halton Safe Management 2.0 system components

▪ The BMS event/alarm log of the most recent maintenance period

7.2 Maintenance schedule

Carry out scheduled maintenance according to the maintenance plan of the building.

Note: To ensure proper operation of fire dampers, inspection must be carried out regularly according to local
building codes. The minimum recommended inspection period is every 6 months. Save the inspection
documentation for future needs.

Note: In normal conditions, the Halton Safe Management 2.0 controller does not require yearly maintenance.

7.3 Step by step instructions

7.3.1 Logging in as Service

For information on the user levels, see

User levels

1. On the homepage, select the lock icon at the top of the view. A keypad opens.

Halton Safe Management 2.0 (SM2) - Installation, commissioning, operating, and maintenance guide

1.0

Содержание Safe Management 2.0

















































































Результаты поиска

Содержание Safe Management 2.0

Отзывы:

Похожие инструкции для Safe Management 2.0

Бренды по названию

Популярные бренды

Halton Safe Management 2.0, Инструкция по установке, пусконаладке, эксплуатации и техническому обслуживанию

Результаты поиска

Содержание Safe Management 2.0

Отзывы:

Похожие инструкции для Safe Management 2.0

Бренды по названию

Популярные бренды