Figure 13. Connecting the pipes. Left: Push-fit fitting. Right: Compression fitting.
4.3 Checks after installation
Before commissioning can start, make sure the following has been taken care of:
▪ The unit is installed correctly.
▪ The unit is connected to the ductwork correctly.
▪ The water connections are connected correctly.
Note: The visible surface of the unit is protected with removable plastic coating. It protects the surface from dust,
dirt, and small scratches. It is recommended that you leave the plastic coating in place until the unit is taken into
use.
Halton Rex Expander (RXP) - Installation, commissioning, and maintenance guide
18
1.0
All rights reserved ©Halton
