Needed for installation
•
A power drill with a long (at least 11,5 cm), Torx type screwdriver is
needed to attach the Cradle to a wall.
•
E.g. a ladder to install the device above the passageway.
•
Installation application from Haltian or other QR code reader
application to identify the sensor device.
• Thingsee INSTALLER application (Android & iOS) to identify the
sensor device and configure the direction
Thingsee COUNT is installed above a doorway or other passage from
where it detects movement that passes beneath the device.
Thingsee COUNT consists of a sensor device unit and a cradle that
houses the sensor and prevents the power cable from straining and
pulling off. The device is powered by an external power source via a
USB connector.
A typical use case for Thingsee COUNT is visitor counting and utilization
monitoring for e.g. meeting rooms or other spaces. In general, the
device can be placed in any passageway within the limits of the sensor
detection capability. Refer to chapter ‘Detection Capability’ for detailed
information.
Thingsee COUNT determines the direction of the movement when,
for example, people enter and exit a room. The direction is configured
during the installation using the Thingsee INSTALLER application so
that the device knows which side is regarded as moving into the space.
The other side is automatically regarded as moving out.
Using Thingsee COUNT sensor device