6
Take the B-cover and place it on the wall on the decided location. Screw the B-
cover to the wall (use anchor with concrete wall or gypsum board. Place the
batteries inside the A-cover.
Take A-cover and identify the product by reading the QR code in the side of the
A-cover. To identify the device over Thingsee API, please follow the link for
further information:
https://support.haltian.com/api/open-services-api/api-
Attach the A-cover to the B-cover attached to the wall. (Make sure the Thingsee
logo is right way).
Note: Make sure the sensor is installed max. 20 meters form the next sensor or
gateway. This is to ensure full coverage mesh network between the sensors and
the gateway.
Detection Capability
• C
O
2
measurement range 400
–
5 000 ppm; extended range up to 10 000 ppm.
Accuracy ±3% (In extended range ±10%)
• TVOC measurement range 0 –
600000 ppb. Resolution 1ppb at range 0ppb-
2008ppb, 6ppb at range 2008ppb
–
11110ppb, 32 ppb at range 11110ppb -
60000ppb
• Temperature
-40 ºC to + 85 ºC. Please note recommended operation
temperature -0º C to +50 ºC. Accuracy ±0,2C.
• Relative humidity can be measured between 0
-
100% RH. Accuracy ±2%. •
Barometric pressure can be measured between 300-1200hPa. Absolute accuracy
is ±1hPa. Pressure sensor precision is ±0.002hPa in high precision mode.
• Ambient light sensing between 0
-100k lux. Light level measurement not
calibrated. Only for indicative purposes.
