Haltech HT051100, Быстрый старт

Страница: 14 / 16

Notes PLATINUM Sport GM
Quick Start Guide
Congratulations on purchasing a Haltech Engine Management System.
This
fully programmable Plug and Play product opens the door to virtually limitless
performance modification and tuning of your vehicle. Programmable systems allow you
to extract all the performance from your engine by delivering precisely the required
amount of fuel and ignition timing that your engine requires for maximum output under
all operating conditions.
This quick start guide will walk you through installation of the Platinum Sport GM ECU
into a vehicle. This guide is accompanied by the full service manual located on the
software CD provided with the ECU that you or your tuner will need to refer to before
completing your installation and configuration. The Manual can also be downloaded
from the Haltech website
www.haltech.com
Supported Vehicles
The Platinum Sport GM ECU supports the following vehicles:
•
Holden Commodore VN - ( V6 & V8 )
•
Holden Commodore VP - ( V6 & V8 )
•
Holden VQ Statesman - ( V6 & V8 )
•
Holden Commodore VR - ( V6 & V8, Manual Transmission only)
•
Holden Commodore VS - ( V6 & V8, Manual Transmission only)
Platinum Sport GM Kit Includes
•
Haltech Platinum Sport GM ECU
•
USB Cable
•
Software CD
•
Quick Start Guide
•
Haltech Sticker
Optional Accessories ( Sold Separately )
•
Rear Auxiliary Harness ( HT040003 )
Loaded Basemap
Your Platinum Sport GM ECU has been programmed with a basemap to suit a
Holden V8 standard engine using the standard MAP sensor.
Alternatively, a basemap to suit the V6 variant can be found in the
C:\Users\XXXX\Documents\Haltech\ECU Maps\SportGM folder for you to
upload into your ECU.