halstrup-walcher PS*3**Mod series, Инструкция по эксплуатации

Страница: 6 / 32

Instruction Manual PSx3xxMod
6
Never apply force to the housing cover, e.g., for supporting weight.
Driving the PSx3xxMod rearward is prohibited (
e.g. it’s not allowed to
turn the output shaft by an external force).
2.3 Pin assignment
For the supply voltage either a Binder series 713/763 (A-coded) round, 5-pin plug for
PSE and PSS devices or a 5-pin Harting plug with protective sleeve (HAN4A) for the
PSE34xx devices is located in the housing cover of the PSx3xxMod.
A series 715 (B coded) 5-pin round socket and an optional 5-pin (B encoded) plug are
provided for connecting the Modbus.
A Binder series 718 4-pin plug is used to connect the jog keys (optional).
Supply voltage connector: Connector for jog keys
round plug Harting plug
(external top view) (external top view)
1 +24V motor
2 GND (motor)
3 +24V control unit
4 GND (control unit)
5 housing/pressure balance
1 +24V (output)
2 forward key
3 reverse key
4 ground
To prevent the ingression of fluids into the PSW-housing during
cooldown, use a special cable with an airtube for pressure
balancing of your PSW.