P26 Instruction Manual
17
7.2.2.1 Value
This is used to set the volume flow value displayed at the maximum scaled pressure. 0 is
always used as the lower scale value on the volumetric flow display (root-extracted measured
value). The maximum pressure is the larger of the two scale values, which is used as a basic
calculation.
7.2.2.2 Units
You can use this menu item to select the scaling unit of the volume flow value.
This unit don’t
have to be identical to the selected display unit. The following volume flow units can be
selected: m³/s, m³/h, ft³/h.
Mass flow
This menu item is used to adjust the mass flow display values.
The following sub-menu items are available:
Value
Units
7.2.3.1 Value
This is used to set the mass flow value displayed at the maximum scaled pressure. 0 is always
used as the lower scale value on the mass flow display (root-extracted measured value). The
maximum pressure is the larger of the two scale values, which is used as a basic calculation.
7.2.3.2 Units
You can use this menu item to select the scaling mass flow unit.
This unit don’t have to be
identical to the selected display unit. The following mass flow units can be selected: kg/s,
kg/min, kg/h
Flow rate
This menu item is used to adjust the flow rate display values.
The following sub-menu items are available:
Value
Units
7.2.4.1 Value
This is used to set the flow rate value displayed at the maximum scaled pressure. 0 is always
used as the lower scale value on the flow rate display (root-extracted measured value). The
maximum pressure is the larger of the two scale values, which is used as a basic calculation.
7.2.4.2 Units
Use this menu item to select the scaling flow rate unit.
This unit don’t have to be identical to
the selected display unit. The following flow rate units can be selected: m/s, mph, f/s, f/min,
km/h