Printed in the U.S.A.
Water Filtration Module
(CONTINUED)
INSTALLATION INSTRUCTIONS
The filter housing should be installed on the
inlet water line going into the cooler. To aid in
installation a universal mounting bracket is
listed on this page. A water shutoff valve should
be installed on the incoming water line to aid in
filter changing. Can be installed on all units if
placed on outside of unit on waterline.
Designed for use on SCWT units.
WARNING:
The granular activated carbon cartridge will
contain a very small amount of carbon fines
(very fine black powder) and a new cartridge
after installation should be flushed with suffi-
cient water to remove all traces of fines from
your water system before using the water.
Each time you use water from your filtered
water tap for drinking or cooking purposes, it is
recommended that you run (flush) the tap for at
least 10 seconds prior to using water. This is
particularly important if the water tap has not
been used daily.
DESCRIPTION
PART NO.
Universal mounting bracket with
10-15403-51-550
mounting screws (shown above)
Installation and operating instructions available.
Form 14-15269-34-870 (Rev. A)
