Halotherapy Solutions Halo STAR, Руководство пользователя, Страница: 35 / 48

halotherapysolutions.com
35
Assembly Instructions Cont’d
14 - INSTALLING FRONT HEATERS
1. Locate the two front heaters and two side wall heaters.
These heaters will attach to the glass.
2. Find the molex plug coming out of the bottom of one of the
heaters. Align the heater with the holes in the glass and plug
the heater into the molex connector coming out of the floor.
3. Align the the hole in the back of the heater with the hole in
the front wall glass. Using the included screws and washers,
secure the heater to the glass through the pre-drilled hole.
One washer will be placed on the inside and one on the
outside glass. The heater will be secured with these screws
in two locations.
4. Repeat this for the right front wall heater and both side wall front heaters.
15 - LOCATING AND PLUGGING IN POWER CORD
The power cord comes out of the roof of the Halotherapy Cabin. It is located in the trap door in the roof at the
rear left facing corner. The power cord will plug into the appropriate electrical outlet. The power cord is 8’ long.
Note : We do not recommend using an extension cord for your sauna.
Please plug the sauna directly into the wall receptacle.
Halo IR