QUICK START GUIDE:
Voltage: 110 VAC
Capacity: 4 L
Model: HALOGEN Purify
Power: 35 W
Operating Time: 1, 2 and 4 hours
TO FILL & RUN A NEW BATCH:
1.
Add some purified or distilled water to a mixing container.
2.
Stir in 8 tsp. salt (non-iodized) to the mixing container and stir
t
o
dissolve.
3.
Remove the lid and pour the salt solution into the HALOGEN
Purify.
4.
Top up HALOGEN Purify with fresh water to the 4L level and
place the lid back on.
5.
Plug the HALOGEN Purify into an outlet. You will hear one
beep indicating that the unit has power.
6.
Press the On/Off button 3 times to start the 1 hour brew time.
The unit will turn off when complete.
TO START PURIFYING THE AIR:
1.
Using an HOCL test strip, verify that the solution is at the
desired strength. (~200ppm).
2.
Press the On/Off button 2 times (The unit will begin fogging).
3.
Press the Fogmeter button to switch the unit between 3,2,1 &
0
(High, Med, Low & Off).
TO TURN OFF THE HALOGEN PURIFY:
1. Press the On/Off button 2 times.
Technical Specifications
:
Содержание Purify
Страница 1: ...EPA Est No 97973 CHN 1...
