Halogen K2, Руководство пользователя, Страница: 4 / 4

Cleaning Instructions:
1. Never submerge base in water.
2. Rinse spray bottle with fresh water to extend service life.
3. If you notice a reduction in the bubbles during the generation
process, the electrodes may be dirty. To clean, pour distilled
white vinegar into the bottle so that the electrode is submerged.
Let soak for 1-2 hours, shake for 1-2 minutes with the lid on and
rinse.
Unit is NOT dishwasher safe
•
While operating DO NOT place anything inside of the bottle.
•
Keep solution out of reach of children.
• Do not ingest solution.
• Do not immerse device in water.
• Disconnect power immediately if a leak occurs.
•
Rinse metal surfaces with water and wipe clean after specified
contact time.
• Hypochlorous Acid (HOCL) is color safe for most fabrics. Prior
to using test it in an inconspicuous area. Do not use on silk.
Caution:
Follow all instructions and safety precautions to ensure safe operation.
Additional Information
• Hypochlorous acid (HOCl) is a form of active chlorine at a pH
range between 4-6. Adding vinegar lowers the pH increasing
yield and potency of disinfectant solution.
•
Filtered water is recommended to extend product life.
• Low concentration solution is safe for use on foods. Rinse food
thoroughly after application.
See website for a complete list of uses and additional information:
www.halogenclean.com
Chart & Graph:
Note: If your electrolyzed solution is between a 4-7 pH
then Hypochlorous Acid has been produced. If it is
above that parameter, you will have Bleach.
Sodium Hypochlorite (Bleach) Concentration and Wait
Times
Concentration
Range
Salt
6 min
Cycle
Time
300-500 ppm 1.5 tsp (7.5g) 1 6 min
500-800 ppm
2.5 tsp (15g)
2 12 min
1000-1500 ppm 1 Tbsp (22.5g) 3 18 min
How To Make Bleach:
Above salt measurements are for making a full 300ml of disinfectant.
Adjust as necessary.