HALOBOARD Halo CEEWA, Руководство пользователя и инструкции по безопасности

Страница: 12 / 20

11
When you start up the Flight App or power on the Sports Watch Remote, the module icon will turn solid
white if it is paired, or remain an outline if it still needs to be binded.
Flashing Module icon means there is weak or no GPS signal, or interference.
Binding and Connection Procedures
4. Follow Module
The Follow Module can be paired with either the Remote Controller or the Sports Watch Remote. Be
sure to pair either remote to the drone first, and then pair the Follow Module.
Binding Procedure :
To pair the Follow Module to the Remote Controller or to the Sports Watch, the Halo Ceewa and all accessories
must first be powered off.
ACTIVATE BINDING MODE ON FOLLOW MODULE:
1. Make sure Drone and all other accessories are powered off.
2. Power on the Follow Module by pushing the power button twice and holding (pg. 7).
3. Once the Module is powered on, push the power button 6 times to initiate ‘Binding Mode’. Blue Status LED
light on Module will blink in intervals of 3.
4. Once paired, the Blue Status LED on the Follow Module will be solid.
POWER ON AND ACTIVATE BINDING MODE ON REMOTE CONTROLLER (see pg 9).*
*The only difference here will be that the red blinking status LED on the RC will just go from blinking red
(pairing) to solid red (paired). The status LED on the RC only turns green if it is connected to the drone.
OR
POWER ON AND ACTIVATE BINDING MODE ON SPORTS WATCH REMOTE (see pg 10).
0.5s 0.5s