Halo Pocket Power StarLight 3000, Руководство по эксплуатации

Страница: 3 / 11

Getting Started
Charge the HALO Pocket Power StarLight 3000 until the
LED displays a solid green light (no lights should be
flashing). This will take up to six hours and will fluctuate
depending on the charging power source.
IMPORTANT: Charge your HALO charger for a full
six hours before regular use. Subsequent charging
will take five - six hours.
Charging the HALO Pocket Power StarLight 3000
Using the supplied HALO Charge It Charge Me cable,
plug one USB connector into the HALO charger and
plug the other USB connector into a computer or an
AC power source with a USB 5V input.
While charging the HALO charger, the LED will flash
one of the following colors, indicating the charge level.
Red (1%-33%), orange (34%-66%), and green
(67%-99%). When the HALO charger is 100% fully
charged the green LED will become illuminated and
no longer flash. When the charger is not in use, slide
the power switch to the OFF (lower) position to
conserve the battery.
The charging cable works in either direction (see
Figure 1 for reference). Connect A to the power source
and B to the HALO charger, or connect B to the power
source and A to the HALO charger.