Halo BOLT 57720, Руководство по эксплуатации

Страница: 8 / 18

5 | POWER YOUR LIFE
3. Press the “Jump Start” button and wait for solid green light.
NOTE:
A pulsing green light indicates safety checks are in progress.
4. Start your vehicle
NOTE:
The HALO BOLT will allow 3 consecutive jump start attempts after each time you
press the jump start button. You must allow up to 15 seconds between each jump
start attempt. During the 15 seconds, the jump start button will flash green while
the HALO BOLT performs its safety checks. Once the jump start button illuminates
solid green, the HALO BOLT is ready for the next jump start attempt.
If the vehicle has not successfully started after turning the key (or pressing the
engine start push button)
3 times, disconnect the jumper cables from the HALO
BOLT and the vehicle battery and restart the process from step 1.
5. Disconnect the jumper cable clamps from the car battery.
NOTE:
While jump starting your vehicle, you cannot charge your electronic devices and/or
you cannot charge the HALO BOLT via the AC wall charging adapter.
6. Remove jumper cables from the Halo Jump Start Output and close
cover.