IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
WARNING: When using this product, basic precautions
should always be followed, including the following:
• Read all the instructions before using the product.
• To reduce the risk of injury, close supervision is necessary
when the product is used near children.
• Do not put fingers or hands into the product.
• Do not expose product to rain or snow.
• Use of a power supply or charger not recommended or
sold by product manufacturer may result in a risk of fire
or injury to persons.
• Do not use the product in excess of its output rating.
Overload outputs above rating may result in a risk of fire or
injury to persons.
• Do not use the product that is damaged or modified.
Damaged or modified product may exhibit unpredictable
behavior resulting in fire, explosion or risk of injury.
• Do not disassemble the product. Take it to a qualified
service person when service or repair is required. Incorrect
reassembly may result in a risk of fire or injury to persons.
• Do not expose a product to fire or excessive
temperature. Exposure to fire or temperature above
100°C/212°F may cause explosion.
• Unplug the product when not in use.
• Improper use of this product may result in product
damage, excess heat, toxic fumes, fire or explosion, for
which damages you (“Purchaser”), and not HALO2CLOUD
LLC. (HALO) (“Manufacturer”) are responsible.
• This product should be operated only in open-air
conditions. It should not be operated in an enclosed,
unventilated space such as a carrying bag, pocket, purse or
bedding. Failure to follow these instructions may damage
the product by overheating.
• Be cautious of drops, bumps, abrasions, or other impacts to
this product. If there is any damage to the product such as
dents, punctures, tears, deformities, or corrosion due to any
cause, discontinue use. Contact Manufacturer or dispose of
it in an appropriate manner.
• Do not disassemble this product or attempt to re-purpose
or modify it in any manner.
• Do not attempt to replace any part of this device.
• Have servicing performed by a qualified repair person using
only identical replacement parts. This will ensure that the
safety of the product is maintained.
• Never dispose of batteries in the garbage. Disposal of
batteries in the garbage may be unlawful under state and
federal environmental laws and regulations. Always take
used batteries to your local battery-recycling center.
• The lithium-ion rechargeable battery used in this device
may present a risk of fire or chemical burn if mistreated.
Do not expose to fire or excessive temperature.
• For questions or instructions for the various ways to charge
this device, refer to the illustrations inthis operating
instructions.
• If this device is accessible to or may be used by a minor,
purchasing adult agrees to be solely responsible for
providing supervision, instruction, and warnings. Purchaser
agrees to defend, indemnify, and hold Manufacturer
harmless for any claims or damages arising from
unintended use or misuse by a minor.
• All products have gone through a thorough quality
assurance inspection. If you find that your device is
excessively hot, is emitting odor, is deformed, abraded, cut,
or is experiencing or demonstrating an abnormal
phenomenon, immediately stop all product use and
contact Manufacturer.
• This device has been evaluated to meet general RF
exposure requirement. The device can be used in portable
exposure condition without restriction.
• Switch off the power bank when not in use.
CAUTION: Risk of Fire and Burns. Do Not Open, Crush, Heat
Above (100°C) or Incinerate. Follow Manufacturer’s Instructions
TABLE OF CONTENTS
Safety Precautions
Included Items
Operating Instructions
Specifications
Warranty and Contact Information
POWER YOUR LIFE | 4
INCLUDED ITEMS
- HALO 10000 AC
- USB-A to Micro USB Cable
- USB-A to USB-C Cable
- USB-A to Lightning Cable
1 | Built-in Cable Insert 1
2 | AC Wall Plug
3 | Built-in Cable Insert 2
4 | Power ON/OFF Button
5 | USB-C Bi-directional Port
6 | Battery Indicators
OPERATING INSTRUCTIONS
The HALO 10000 AC is equipped with HALO Smart Charge
Technology. This means the HALO 10000 AC will
automatically detect when an electronic device is connected.
The LED Battery Indicator will display four solid blue lights
when fully charged. The total charge time is 4 hours.
CHARGING THE HALO
10000 AC
There are two ways to recharge the HALO 10000 AC.
- Using the built in AC Wall Plug: Simply pull down the AC
Wall Plug and connect to a wall outlet to begin charging.
- Using the USB-C Bi-Directional Port: Use a USB-C Cable to
begin charging.
While charging, the LED Battery Indicator will turn on and
flash. When battery is fully charged, the LED Battery Indicator
will stop flashing.
CHARGING ELECTRONIC DEVICES
To charge electronic devices, use the built-in cables. Gently
pull the top of the respective cable. The HALO 10000 AC
comes with a USB Micro cable, USB-C Cable and Lightning
Cable. Simply plug the compatible cable into your device and
it will automatically begin to charge.
SPECIFICATIONS
Model:
HAC-10K
Battery Capacity:
Contains 10,000 mAh battery
Battery Voltage:
3.8V
Input:
AC 100V~240V
USB-A Output 1:
5V 3A
USB-A Output 2:
5V 3A
USB-C PD:
5V 3A, 9V 2A, 12V 1.5A
Total output:
15W(5V 3A)
Dimensions:
6.5 x 2.9 x 0.75 inches
Weight:
0.59 lbs
Operating Temperature:
32°F - 104°F (0°C - 40°C)
Storage Temperature:
68°F - 158°F (20°C - 70°C)
COMPLIANCE WITH FCC REGULATION
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
NOTE:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced technician
for help.
• Any changes or modifications not expressly
approved by the party responsible for compliance
could void the user's authority to operate the
equipment
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment.
CAUTION: To comply with the limits of the Class B digital
device, pursuant to Part 15 of the FCC Rules, this device must
be used with certified peripherals and shielded cables. All
peripherals must be shielded and grounded. Operation with
non-certified peripherals or non-shielded cables may result
in interference to radio or reception.
MODIFICATION: Any changes or modifications not expressly
approved by the party responsible for compliance could void
the user's authority to operate the equipment.
CONFORMS TO UL SUBJECT STD. 2056
LEGAL
Manufacturer shall not in any way be liable to you or to any
third party for any damages you or any third party may suffer
as a result of use, intended or unintended, or misuse of this
product in conjunction with any device or accessory other
than the appropriate device for which this product is
designed. Manufacturer will not be responsible for any
damages you or any third party may suffer as a result of
misuse of this product as outlined above. Purchaser agrees to
defend, indemnify, and hold Manufacturer harmless for any
claims or damages arising from unintended use or misuse,
including use with an unintended device.
LIMITED WARRANTY
HALO2CLOUD LLC. (HALO) warrants its products to be free
from defects in material and workmanship under normal use.
During the first 90 days from date of purchase, HALO will
repair or replace the defective product.
For all questions about the warranty or exchange requests,
please call 888-907-6274, or contact us at
https://www.zagg.com/warranty-policies.
This Limited Warranty sets forth the full scope of HALO’s
obligations and liabilities with respect to the product. All
implied warranties, including without limitation the implied
warranties of merchantability and fitness for a particular
purpose, are limited to the duration of this Limited Warranty.
In no event shall HALO be liable for any incidental, special,
consequential or punitive damages or any damages or losses
of or to electronic equipment or products that are used with
any of HALO’s products.
HALO 10000 AC
Thank you for choosing the HALO 10000 AC. Innovative and
easy to use, the HALO 10000 AC offers a versatile design
which includes a built-in AC wall plug, 2x USB-A Power Ports,
USB-C Bi-directional Port and built-in cables. The HALO 10000
AC includes USB-A, USB-C and lightning cables. The HALO
10000 AC conveniently provides fitted cable storage on each
side of the device. With the ability to be easily recharged just
about anywhere and anytime, the HALO 10000 AC is perfect
to provide power on the go.
Please read the operating instructions carefully before using
the HALO 10000 AC.
