SAFETY PRECAUTIONS
DANGER-CAUTION Read and understand all safety information
before using this product. Failure to follow these instructions may
result in electrical shock, explosion, fire which may result in serious
injuries, death or property damage.
• Read all instructions before using the product.
• Do not get your HALO POWER STATION 1000 wet or store in extreme
temperature conditions.
• Do not disassemble or attempt to repair your HALO POWER
STATION 1000 yourself.
• Use a cloth to clean the exterior of your HALO POWER STATION 1000.
Do not use liquid detergent or chemicals of any kind.
• When used correctly, lithium- ion rechargeable batteries provide a
safe and dependable source of portable power. However, if they are
misused or abused, this may result in leakage, burns, fire or explosion,
causing personal injury or damage to other devices.
• Misusing or incorrectly connecting your HALO POWER STATION 1000
may cause electric shock to users and damage equipment.
• Keep your HALO POWER STATION 1000 dry and away from moisture
and corrosive materials. The HALO POWER STATION 1000 should not
be used near water or wet areas such as bathtubs, showers,
bathrooms, sinks, swimming pools or basements.
• Do not expose your HALO POWER STATION 1000 to moisture, water,
rain, or snow.
• Keep your HALO POWER STATION 1000 away from heat sources,
including open flames, radiators, stoves, ovens, and any other devices
that product heat.
• The lithium-ion rechargeable battery used in this charging device may
present a risk of fire or chemical burn if mistreated. Do not expose to
fire or excessive temperature. Do not expose to heat above 212°F
(100°C) or incinerate.
• Your HALO POWER STATION 1000 may become warm under extended
high power operation. Do not cover, wrap, or otherwise restrict the
HALO POWER STATION 1000 during operation.
• In the unlikely event of leakage or explosion use sand or a chemical
fire extinguisher.
• Do not disassemble your HALO POWER STATION 1000. There are no
user-serviceable parts inside. Incorrect reassembly may result in shock
or fire hazard.
• Do not drop or subject to strong impacts. Do not operate your HALO
POWER STATION 1000 if it has received a sharp blow, or has otherwise
been damaged in any way.
• Do not puncture, crush or subject to mechanical shock.
• Only charge your HALO POWER STATION 1000 by the specified
method with the specified charging adapter provided with the unit.
• Do not use any non-HALO-branded accessories with the HALO POWER
STATION 1000. Doing so may cause electric shock to users and
damage equipment.
• The HALO POWER STATION 1000, along with its accessories, are not
toys and should be kept away from children.
• Do not insert any foreign object into the ports or openings of your
HALO POWER STATION 1000.
• Do not clean your HALO POWER STATION 1000 with harsh chemicals,
soaps or detergents. Just wipe the case with a soft cloth.
• Do not modify or attempt to repair the HALO POWER STATION 1000
except as indicated in the instructions for use and care.
• Make sure the HALO POWER STATION 1000’s charging ports do not
become contaminated with lint or other debris.
• Batteries should be recycled or disposed of as per state and
local guidelines.
• The device shall be stored indoors and protected from the elements;
• When in use, steps should be taken to prevent the exposure to rain,
sleet, snow, and the like.
• For appliance and battery storage, do not exceed 104°F (40°C)
• Do not operate in explosive atmospheres such as in the presence of
flammable liquids, gases or dust.
TABLE OF CONTENTS
Safety Precaution
Included Items
Operating Instructions
Troubleshooting Guide
Specifications
Warranty and Contact Information
2-3
5
6-11
10-11
12
14-15
INCLUDED ITEMS
- HALO POWER STATION 1000
- 90W Wall Charging Adapter
LOCATION OF CONTROLS
1. LCD Screen ON/OFF Button
2. LCD Screen
3. DC Input Indicator
4. 12-24VDC Input
5. USB Output ON/OFF Button
6. USB-C PD Input/Output Port
7. USB-A Output Ports
8. 110VAC Output Ports
9. DC Output ON/OFF Button
OPERATING INSTRUCTIONS
Please make sure to fully charge the HALO POWER STATION 1000
before first use.
CHARGING THE HALO POWER STATION 1000
Using the AC Wall Charging Adapter:
Use the provided AC Wall Charging Adapter, and plug the AC adapter
tip into the 12-24V DC charge input. Next, connect the AC Wall
Charging Adapter into a wall outlet. The HALO POWER STATION 1000
will automatically begin charging. When the HALO POWER STATION
1000 is fully charged, all four battery indicator lights will be solid green
and the LCD digital display will indicate 100%. When fully charged,
disconnect the cable.
NOTE:
• The HALO POWER STATION 1000 can be charged with the DC input
and USB-C input simultaneously. This dual charging will provide a
faster recharge times. An optional USB-C PD charging adapter (not
included), offers up to 100W of additional input.
• The HALO POWER STATION 1000 can also be charged via solar panel
(not included) and car charger (not included).
• The HALO POWER STATION 1000 can be charged and discharged
simultaneously.
• Recharge times will vary based on the charging method used. The
maximum power input using simultaneous DC and USB-Type C
charging is 300W. The total charge time with a 300W input is less than
5 hours.
BUTTON OPERATIONS
LCD Button:
Check the battery level by pressing the LCD button. To turn on/off the
LCD display, simply press the LCD button. The LCD display will
automatically turn off after 15 seconds if nothing is connected to the
output ports.
USB Output ON/OFF Button:
To turn ON, press USB Output ON/OFF Button. The USB Ports Output
LED will light up and the LCD Screen will turn on. To turn OFF, press the
USB Output ON/OFF Button.
DC Output ON/OFF Button:
To turn ON, press DC ON/OFF Button. The DC Output Indicator will light
up and the LCD Screen will turn on. To turn OFF, press the DC ON/OFF
Button.
AC ON/OFF Button:
To turn ON, press the AC ON/OFF Button. The AC Output Indicator will
light up and the LCD Screen will turn on. To turn OFF, press the AC
ON/OFF Button.
NOTE:
• To preserve the battery, turn off the DC, USB and AC outputs when the
product is not in use.
CONNECTING YOUR ELECTRONIC DEVICES,
EQUIPMENT AND APPLIANCES
The HALO POWER STATION 1000 is compatible with AC and DC
electronic devices, equipment and appliances where portable,
stationary, or emergency power is required.
There are several ways to power and charge electronic devices with the
HALO POWER STATION 1000. Both AC and DC Output Ports can be used
simultaneously.
Using the 110V AC Output Ports:
The HALO POWER STATION 1000 can be used to power your 110V AC
electronic devices, equipment and appliances rated for 1000Watts or
less. To begin, connect the AC power plug from your
device/equipment/appliance into the AC Output Port of the HALO
POWER STATION 1000. Then press the AC ON/OFF Button.
NOTE:
• Make sure the AC Power Plug is fully plugged into the AC Output Port.
• The HALO POWER STATION 1000 will provide up to 2000Watts
surge power for a short duration.
Using the USB Ports:
The HALO POWER STATION 1000 is compatible with any USB charging
cable. To begin, press the USB ON/OFF Button, then plug the standard
USB end of the cable into any of the 5V/2.4A USB Output Ports.
Connect the tip into the input of your electronic device to begin
charging. For PD (Power Delivery) Output, use a USB-C to USB-C cable
(not included) to charge your compatible electronic devices.
HALO USB Smart Charge Technology
Your HALO POWER STATION 1000 contains the HALO USB SMART
CHARGE TECHNOLOGY to achieve higher compatibility for charging
USB electronic devices. The HALO USB SMART CHARGE TECHNOLOGY
will allow the HALO POWER STATION 1000 to communicate with your
electronic device and provide the fastest and safest charge for that
device.
Using the 12V DC Power Socket and 5525 Output Ports
The HALO POWER STATION 1000 can be used to power your 12V DC
electronic devices, equipment and appliances. To begin, connect your
12V compatible device/equipment/appliance into the Power Socket or
5525 Output Port(s). Then press the DC ON/OFF Button.
USING YOUR HALO POWER STATION 1000 FLOODLIGHT
Press the Floodlight ON/OFF Button once to turn ON.
Press the Floodlight ON/OFF Button twice to turn 50% brightness.
Press the Floodlight ON/OFF Button three times to turn
100% brightness.
Press the Floodlight ON/OFF Button four times to turn OFF.
Double Click the Floodlight ON/OFF button to turn on SOS mode light.
Press the button again to turn off SOS mode light.
SPECIFICATIONS
COMPLIANCE WITH FCC REGULATION
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: To comply with the limits of the Class B digital device,
pursuant to Part 15 of the FCC Rules, this device must be used with
certified peripherals and shielded cables. All peripherals must be
shielded and grounded. Operation with non-certified peripherals or
non-shielded cables may result in interference to radio or reception.
TROUBLESHOOTING
If the HALO POWER STATION 1000 cannot charge or power devices,
please check the following steps:
• Make sure the appropriate DC, USB or AC output is turned on and that
the LED buttons are green.
• Check the battery capacity. If it is lower than 3%, please recharge the
HALO POWER STATION 1000.
• Make sure the power consumption does not exceed the rated power
of the port.
• If an error is observed, refer to the Chart on the next page.
• Do not operate the HALO POWER STATION 1000 outside the allowable
operating temperature. (0-40°C / 32-100°F)
Error Codes:
Input Overvoltage Protection: The symbol will flash for 5
seconds when an input over voltage condition is detected.
Output Overload Protection: The symbol will flash for 5
seconds when an AC output overload condition is detected.
Low Power Alarm: The symbol will flash when the power
station batter capacity is less than 3%.
Low Temperature Alarm: This low temperature symbol will
be displayed if the power station is attempted to be used
outside the allowable operating temperature.
High Temperature Alarm: This high temperature symbol will
be displayed if the power station is attempted to be used
outside the allowable operating temperature.
LIMITED WARRANTY
HALO warrants its products to be free from defects in material and
workmanship under normal use.
For all questions or exchange requests, please call 888-907-6274,
contact us at zagg.com/support or visit
www.zagg.com/warranty-policies.
This Limited Warranty sets forth the full scope of HALO’s obligations
and liabilities with respect to the product. All implied warranties,
including without limitation the implied warranties of merchantability
and fitness for a particular purpose, are limited to the duration of this
Limited Warranty. In no event shall HALO be liable for any incidental,
special, consequential or punitive damages or any damages or losses of
or to electronic equipment or products that are used with any of
HALO’s products.
WWW.BESTHALO.COM | 4
