5
COPYRIGHT 2008, ALL RIGHTS RESERVED, Original Instructions
PERMA PURE LLC
Zero-Air™ Generator User’s Manual
Doc. ZA-MAN-001 REV 01
Page 5 of 10
Specifications and features
•
Pump:
Dual head diaphragm, up to 30 psig, 18 slpm
•
Inlet filter:
Sintered SST, 10 micron porosity
•
Dryer:
PD-100T-12MZA Nafion
®
gas dryer
•
Sterilizer:
Ultraviolet light chamber, 254 nm peak wavelength
•
NOx, SOx, HC scrubber: Activated carbon, indicating catalyst blend, 0.7 lbs.
•
CO catalyst:
Palladium impregnated alumina
•
Final filter:
0.1 micron glass fiber particulate filter
•
Operating environment: -20°C to 40°C ambient temp.; 0-95% RH; Altitude up to 2000 m
•
Electrical requirements: 115 VAC ±10%
•
Dimensions:
8.5” W x 10” H x 16.5” L (216 x 254 x 419 mm)
•
Weight:
27 pounds (12.3 kg)
Important safety warnings
Please be sure to review the following basic safety procedures. These procedures
represent the MINIMUM requirements to operate the equipment safely. It is the ultimate
responsibility of the operator to ensure proper safety practices are utilized at the point
of operation. This equipment is to be installed & operated by trained personnel, with
sufficient command of the English language to clearly understand the instructions &
safety warnings.
•
This equipment is NOT designed to operate in a wet environment.
•
NEVER operate the equipment with any part of the enclosure unsecured. All operated
covers must be in place and secured prior to operation. Electrical current may be present
behind covers, even if tools are not necessary to access these components.
•
NEVER attempt service on this equipment without first disconnecting all energy sources.
Repair of this equipment should only be done by properly trained personnel that are familiar
with the potential risks involved with servicing of the equipment.
•
NEVER replace fuses with types other then the sample specification of type and current. Do
not bypass this or any other safety device.
•
NEVER operate this equipment if it is visibly damaged or the possibility exists that it may have
been damaged.
•
The use of components that have not been purchased through an authorized Perma Pure
dealer or directly from Perma Pure may compromise the safety of the operator. Additionally,
use of non-authorized components may change the operating characteristics of this equipment.
Any changes to the equipment, that modify its operation in any way, are dangerous, and are
strictly prohibited.
•
Read the entire operating manual before attempting to set up or operate the equipment.
•
Please heed all warning labels that are on the equipment. They are there to remind you of
possible hazardous conditions.
•
Verify the integrity of any mechanical and/or electrical connections that are made to the unit.
•
Verify that the unit is connected to the proper rated power for the system.
•
Verify that the unit is plumbed properly to operate effectively.
