2: Installing the NIRQuest Spectrometer
016-70000-000-02-201603
13
2.
Use the Allen key to remove the 2 the screws attaching the slit to the spectrometer.
3.
Pull the slit out of the spectrometer.
4.
Put the new INTSMA slit connector into the spectrometer; with the key of the connector on the
left side.
5.
Install the 2 screws again. Use the Allen key to tighten the screws carefully (do not over-tighten).
6.
If necessary, connect the fiber again.
Содержание Ocean Optics NIRQuest256-2.1
Страница 8: ...About This Manual vi 016 70000 000 02 201603 ...
Страница 14: ...1 Introduction 6 016 70000 000 02 201603 ...
Страница 22: ...2 Installing the NIRQuest Spectrometer 14 016 70000 000 02 201603 ...
Страница 48: ...C NIRQuest512 2 5 and NIRQuest256 2 5 Sensitivity 40 016 70000 000 02 201603 ...