Halma Ocean Optics DH-mini UV-Vis-NIR, Инструкция по установке и эксплуатации

Страница: 19 / 24

000-10000-200-02-201510 11
Appendix B
Bulb Replacement
Overview
If the lifetime of either the Deuterium bulb or the Halogen bulb is reached or if one bulb is broken you
can replace the bulbs. Both bulbs are arranged in one housing so the bulbs cannot be changed separately.
To order replacement bulbs for the DH-mini, see
Spectral Output .
Replacing the Bulb
►
Procedure
To replace the bulbs,
1. Remove all eight countersunk screws on each side of the light source housing with the provided
Hexagonal socket screw key SW 2.0.
2. Lift the housing off of the light source.
3. To remove the bulb, disconnect the cable at the rear side of the lamp first (1). Then use the
provided Hexagonal socket screw key SW 1.5 to loosen the stud screw (2).