8
©
BE
A
|
O
ri
gi
na
l i
ns
tr
uc
ti
on
s
|
69
.1
38
8
/ V
2
-
12
.2
0
Technology
Microwave motion sensor
Radiated frequency
24.150 GHz
Radiated power
< 20 dBm EIRP
Radiated power density
< 5mW/cm
2
Detection range (hand)
+/- 10 to 60 cm (adjustable) * if movement towards sensor at 90°
Detection mode
Motion (bidirectional)
Speed of target
Min. 5Hz or +/- 3cm/s, Max. 200Hz or +/- 1.2m/s
Supply voltage
The Equipment must be powered by an approved Class II SELV
limited power source. This requirement consists of the need for
double insulation between primary voltages and the Equipment
supply. The supply current should be limited to 1.5A.
12 - 24V AC +/- 10%
12 - 24V DC +30% / - 10%
Mains frequency
50 - 60 Hz
Power consumption
< 1.5W
Output
Max. voltage
Max. current
Electronic relay (galvanic isolation - polarity free)
42V AC/DC
100 mA
Output hold time
0.5s (in PULSE mode)
Temperature range
-20°C to +55°C
Degree of protection
IP65 with front face and gasket mounted on a smooth surface
Material
PMMA / PC
Front face is treated with biomaster silver biocide tested to ISO
22196:2011. Please use biocides responsibly.
Recommended wiring cable
Stranded cable up to 16 AWG - 1.5mm
2
Door does not open even
when moving the hand
towards the sensor.
Bad or no power supply.
Check power supply. If LED switches on or flashes,
power connection is OK.
Detection range is too short.
Adjust the detection range.
Remove any metal plates in front of the sensor.
Incorrect wiring / connection.
Check wiring and relay connection.
Sensor stays in detection.
The environment influences the
good functioning of the sensor.
Remove any moving object around the sensor.
Incorrect wiring / connection.
Check wiring and relay connection.
Door remains open after
detection/activation.
Wrong output mode.
Switch the output mode to PULSE.
Incorrect wiring / connection.
Check wiring and relay connection.
* An adjustment of the detection field below 10 cm is possible but the detection capability of the sensor can not be guaranteed.
Technical specifications are subject to changes
PL
EA
SE K
EE
P F
O
R F
U
R
TH
ER U
SE - D
ES
IG
N
ED F
O
R C
O
LO
U
R P
R
IN
TI
N
G
BEA hereby declares that the Magic Switch is in compliance with European Directives 2014/53/EU (RED) and 2011/65/EU (RoHS).
The full text of the EU declaration of conformity is available on our website.
This product should be disposed of separately from unsorted municipal waste.
BEA |
A-B Area, 3rd Floor
|
No.1 Building, No.5 Xinghai Road, Beijing Economic Technological Development Area, Beijing
|
China
T
+86 10 57761630
/
F
+86 10 62628775
/
E
/
W
www.bea-asiapacific.com
TROUBLE SHOOTING
TECHNICAL SPECIFICATIONS
