2
Fire detection and evacuation solutions that save lives.
MAN3070
-
5
Overview
XPander is a range of addressable multistate detectors and
associated products developed to enhance the capabilities of
our addressable range. It is an entirely new range which is
connected to an XP95 or Discovery system via interface units
wired to the loop. The interface units communicates with each
other and with the field devices by means of radio signals.
XPander can be incorporated into fire d e tection systems in
heritage listed and architecturally sensitive buildings where the use of fire cables is either impracticable or undesirable. It
may also be used in sites with discrete buildings which need to be connected to a central control panel but where wiring
might present problems.
XPander has been tested and approved to the following standards:
AS 7240
-
7
—
optical smoke detector
AS 7240
-
5 —
heat detector
AS 7240
-
25 —
components using radio links and system requirements
...Ampac Wireless Detectors
Contact points for enquiries and help:
All information in this guide is given in good faith but Ampac Fire Detectors cannot be held responsible for any omissions or
errors. The company reserves the right to change the specifications of products at any time and without prior notice.
General Queries
Phone Number Head Office (WA)
+61 8 9201 6100
Fax
+61 8 9201 6101
Website
ww.ampac.net
