Halls Curved Greenhouse 46, Руководство по сборке

Страница: 29 / 32

46 Curved Greenhouse
Assembly Instructions
(To be read together with 09726 Curved Greenhouse Assembly Instructions)
Parts List
Refer to the parts list in this amendment. Please quote the full code number if you should require spares.
1
Base
Follow section 1 of the original instruction, except that dimension B is 1298 mm for the 46 greenhouse.
2
Plain Gable End
Refer to section 2 of the original instruction.
3
Door Gable End
Refer to section 3 of the original instruction.
4
Assembly
Refer to the amended fig 6 and fig 7 in this amendment.
Follow section 4 of the original instruction, except that for the 46 greenhouse the eaves brace is 12752, the
side sill is 01781, the ridge is 01783, and 2, not 4, diagonal struts 01755 are used, fitted to opposite corners
of the greenhouse.
5
Assembly
Refer to fig VV in this amendment.
Follow section 5 of the original instruction, noting that for the 46 greenhouse there is only one intermediate
bar 01748 on each side, and therefore only one stabiliser 00299. The roof vent sill 08615 is replaced by
12222 which secures to the hole drilled in the right hand plain gable bar 01760GV using a self tapping
screw 00402 (fig VV in this amendment), and to the right hand intermediate bar 01748 using an aluminium
bolt (fig W in the original instruction.)
6
Door
Refer to section 6 of the original instruction.
7
Roof Vent
Refer to section 7 of the original instruction, except that the vent is assembled using 12220 M6 x 6 mm pan
head screws and 12221 square nuts instead of 00400 M6 x 10 mm aluminium bolts and 00697 hex nuts.
8
Glazing
Refer to section 8 of the original instruction. The glass required is listed in this amendment together with a
glazing plan for the sides of the greenhouse.
19206-02 BJG 09/07/01
29