Hallman HDW24PR, Руководство пользователя

Страница: 28 / 39

USA-CAN - 28
19. Programme Time Indicator
Program duration can be monitored via
Program Time Indicator.
1. Changing a Programme
Follow the steps below to change a
program while in operation.
Open the door and press the Start/Pause
Button (11). Choose a new program
by pressing Program buttons (2). After
program selection, press the Start/
Pause button (11). After closing the door
within 4 seconds, the newly selected
program will resume the course of the
old program. If 4 seconds is exceeded
and the door is closed, program will not
resume.
NOTE:
Open the door slightly at first to
stop a wash program before it is complete
in order to avoid water spillage.
Cancelling a Programme
Follow the steps below if you would like to
cancel a program while in operation.
Open the door of your machine. The
selected program will appear on the
display. Press and hold the Start/Pause
button (11) for 3 seconds. “0:01” will be
shown on the display. Press Start/Pause
button (11) and after closing the door of
the machine within 4 seconds, the water
discharge process will start and continue
for 30 seconds. When the program is
cancelled, buzzer will sound 5 times.
Switching the Machine Off
“0” will be shown on the display when the
selected program is complete. Buzzer will
also sound 5 times. You can then switch
your machine off using the Power On/Off
button. Disconnect the plug and turn off the
water tap.
NOTE: Do not open the door before the
program is complete.
NOTE: If the door of the machine is opened
or the power is cut off while a program is in
operation, the program will continue when
the door is closed or the power returns.
NOTE: If the power is cut off during the
drying process, the program will terminate.
Your machine will be ready for a new
program selection.