Hall Technologies February 03, 2023
Page 13 of 52
Control – IR Remote Control
Many camera controls can be accessed using the included remote control.
Remote Element
Description
Standby On:
To put the camera into standby mode, hold power button for 3 seconds. The
camera’s LED will flash green during the button press and then will turn red, and the
camera will turn and face the back.
Standby Off:
To exit out of standby mode, hold power button for 3 seconds. The camera
will self-test and return to the home position.
Set:
Set the remote to control different cameras.
Camera Select:
Select the camera, 1~4, to control with the remote.
Number Key:
Used to set or recall presets, 0 ~ 9.
*, #:
Used for key combination use.
Note:
See below for all possible key combinations.
Auto:
Puts the camera’s focus into auto mode.
Manual:
Puts the camera’s focus into manual mode
Focus +/-:
Manually adjusts the camera’s focus.
Zoom +:
Increase the zoom on the camera.
Zoom -:
Decrease the zoom on the camera.
Note:
Holding the zoom +/- buttons will keep zooming in or out and stops as soon as the
button is released.
Set Preset:
To set a camera preset, press this button and then the desired 0~9 number.
Clear Preset:
To clear a camera preset, press this button and then the desired 0~9
number.
BLC ON/OFF:
This button turns on/off the back light feature.
Menu:
Press this button to enter or exit the on-screen display (OSD) menu. (See next
section to view the OSD settings.)
Pan:
Press the arrow left/right buttons to pan the camera.
Tilt:
Press the arrow up/down buttons to tilt the camara.
Note:
Holding the buttons will continue to pan/tilt and stops as soon as the button is
released.
Home:
This button returns the camera to the middle position, or, acts as the enter button
in the OSD menu.
F1:
Turns off AI human detection.
F2:
Turns on AI human detection.
F3:
Toggles between Real-time Tracking mode and Region Tracking mode.
F4:
Change tracking target on Real-time Tracking mode.