Compact CAT5 Audio/Video Splitter and Receiver
5
Figure 2.4
Compensation
Adjustment
2. Installation
1.
Connect the VGA IN and AUDIO IN connectors of the UVA-x to the
computer's video and speaker ports using the supplied cables (see figures
2.1 and 2.2).
2.
Connect the local monitor and speakers to the device's VGA OUT and
AUDIO OUT connectors respectively. (see Figure 2.3)
NOTE
To expand the number of outputs, use these ports to daisy chain to
another UVA-x units VGA and audio inputs. Connect the local
monitor and speakers to the last unit in the chain.
3.
Connect the included power supply to the power input connector on the
unit.
4.
Using Category-5 or higher UTP cable connect one or more URA
receivers to the sender’s RJ45 outputs.
5.
Connect the remote monitor and speakers to the receiver unit and attach
the power supply to the receiver
