ULTRA-V-S and ULTRA-V-R
4
© Copyright 2020 Hall Research, Inc.
2.0 Package Contents
ULTRA-V-1S / -4S / -8S
(x 1) ULTRA-V-1S / -4S / -8S
(x 1) POWER SUPPLY
(Hall P/N 511-IEC5V4AP5L, Mfg P/N 3A-186DB05)
(x 1) USER’S MANUAL CARD
ULTRA-V-R
(x 1) ULTRA-V-R
(x 1) POWER SUPPLY
(Hall P/N 511-IEC5V4AP5L, Mfg P/N 3A-186DB05)
)
(x 1) USER’S MANUAL CARD
3.0 Setup
Installation
Connect the HDMI Source to the ULTRA-V Sender port marked
“HDMI IN” using a quality HDMI cable
Optionally, connect HDMI Display to the ULTRA-V Sender port
marked “HDMI OUT” or daisy-chain to a second ULTRA-V “HDMI
IN” port
Using CAT5e or CAT6 cable(s), connect the ULTRA-4K-S “OUTPUT”
port(s) to the ULTRA-V-R “INPUT” port
Connect ULTRA-V-R “HDMI OUTPUT” to a Display using a quality
HDMI cable
Once all connections have been made, apply power to the ULTRA-V
Sender(s) and ULTRA-V-R Receiver(s)
NOTE
The ULTRA-V-R Receiver’s RJ45 input may also be connected
to ULTRA-4K-S sender (or the RJ45 loop output on the
ULTRA-4K-R Receiver). When plugged to ULTRA-4K, the
Receiver will show the Video A by default. The ULTRA-V-R
Receiver can be set to display Video B by the user (please
contact Hall Research technical support for details).
