SP-HDMI-4A
3
1. Introduction
General
Hall Research’s Model UH-2D-3S is a member of the Mini-CAT® video extension product
line. The UH-2D-3S is used to extend HDMI™ audio/video signals on Cat6 cables to 3
remote receivers (Model UH-2D-R). The device provides one local HDMI output and 3 sets
of RJ45 pairs for connection to the remote receivers.
The UH-2D-3S is compatible with HDMI™ versions 1.2a, 1.3 and 1.4 in terms of 3D, deep-
color, and 4K video support. The remote receiver (UH-2D-R) includes state of the art
automatic equalization to compensate for signal losses in the cables and produces a crisp
image as clear as the original.
The unit is housed in a compact sturdy metal enclosure that is 1RU high. Two can be
mounted side-by-side using Hall Research Model RMS-1U-1A rack shelf (UH-2D-3S has
threaded holes on the bottom for this purpose), or a single unit can be mounted using the
Model RMK-05 Rack Mount Kit
RMS-1U-1A rack shelf RMK-05 Rack Mount Kit
Features
•
Compact unit sends uncompressed HDMI video to 3 remote displays on 2 Cat6
•
Drives cables to 170 ft @ 1080i/720p or 130 ft at 1080p 60 Hz 24 bit
•
Local HDMI output for direct connection to a local display
•
Supports HDMI 1.4 Deep-Color (up to 12 bits per color) and 3D formats
•
Supports PC & HDTV resolutions, VGA~WUXGA and 480p~4Kx2K
•
LED indicators for power and status of 3 remotes (power and HPD detection)
•
Supports LPCM 7.1CH, Dolby TrueHD and DTS-HD Master Audio
•
Built-in power supply with standard IEC320/C14 AC power jack
•
Includes HDMI input cable
•
1 RU, half-wide compact size with optional mounting tray and ears
•
Supports DVI-D single link extension with optional adapter cables
•
Intelligent EDID Pass-through or EDID Emulation (user selectable)
•
Low power (consumes less than 6 watts fully loaded)
